studio velocity l 日本愛知縣sannouno辦公室-設計風向

velocity在日本愛知縣岡崎市sannouno辦公室的頂部設計了一個可上人的大弧形屋頂。該建築物由木結構組成，同時包含兩個層次：一樓的工作區區域被室外露台打斷；樓上設有一個小型公用廚房和用餐區，可通往屋頂。在那裏，一係列的開口允許一層的樹木進一步生長，允許自然進入整個建築。

studio velocity has topped sannouno office in okazaki city, aichi prefecture, japan, with a large, curved, inhabitable roof. the building comprises a wood construction, while it incorporates two levels: workspace areas punctuated by small exterior terraces on the ground floor; and a small communal kitchen and dining area on the upper floor, which opens up toward the rooftop. there, a series of openings allow the trees of the ground floor to grow further, allow nature to enter through the entire building.

velocity工作室在一層建造了兩層高的木製辦公大樓，作為一個開放的室內平麵，而屋頂是一個露天區域，因為它大部分被密集的建築所包圍，所以保持著它的隱私。屋頂的單一曲麵似乎漂浮在該地區的住宅建築中，而它的形式導致了下麵樓層的不同高度的天花板。樹從一層開始生長，通過屋頂的開口向上生長，重現了公園的氛圍。

studio velocity has built the two-story wooden office building as an open plan interior on the ground floor, while the rooftop, which features an open-air area, maintains its privacy as it is mostly surrounded by densely built constructions. the single curved surface of the roof appears to float amidst the residential buildings of the area, while its form results in a ceiling of varying heights for the level underneath. trees grow from the ground floor and up through the openings on the roof, recreating the atmosphere of a park.

在設計屋頂時，這家日本建築工作室試圖利用重力和張力創建一種新的曲麵，該曲麵具有平坦的材料和非常薄的橫截麵。因此，屋頂采用了預應力結構，其中預先假定的最大載荷已被拉出並固定在適當的位置。

in designing the roof, the japanese architecture studio sought to create a new curved surface with a flat material and a very thin cross section, using gravity and tension. as such, the roof employs a prestressed structure where the assumed maximum load was pulled in advance and fixed in place.